Chastity device reviews discussion

Just a quick update: the chap texted me yesterday asking if I could pop over to the workshop to see what they’d been up to with the belt, so I went there for dinner today. Wow! It’s starting to look like how I imagined it should now. As he was keen to progress, I asked him if he would like me to try it on while I was there and give instant feedback about any alterations etc., thus finding myself heading to the tiny shop floor toilet clutching a mass of stainless steel.

The waistband fitted lovely; just needed a little bending to shape me correctly. Once that was on, I fitted the new part he made based on my drawing for him. The idea was that where some folk have a collaring ceremony and always wear a collar, I wanted it possible to lock onto the belt. It is fitted with a cock ring included in the design which locks in place, meaning you don’t have to remove the belt at all—so it could be worn permanently like a wedding ring. This also helps make everything much more secure once in position.

Next, I fitted the cock tube onto the belt and it sat really well, although the length of the ready-made item I bought off eBay is too long and needs shortening slightly. Finally, the outer cage was placed over the whole assembly and the nuts tightened up—“this will be a lock on the final design,” and boy, it looked scary! The waist belt is thicker than my standard one and also wider slightly, so feels much more substantial around the waist.

The outer cage needed reshaping as it’s too big at present, but once the tube is trimmed down as well, the final shape should be ready. I had taken a spanner and screwdriver into the toilets to fit things, and he was passing them over the stall door while I fitted them before he went out while I fiddled around.

When it came time to remove the outer cage because it was too large, I couldn’t get it off and started getting into a panic trying to prise it off the studs!!!!!! I only had a Phillips screwdriver which wouldn’t help much. Anyway, I did get it off eventually and made notes of what bits needed doing, then started taking photos on my phone.

I dressed and went out into the workshop, explaining what had worked and what hadn’t; they couldn’t believe I had the belt and cock cage on under my work clothes. He cut the outer cage down with a grinder, leaving me with the base shape so I could try it over the whole belt without fouling the cock tube, and we shaped it slightly more to sit closer to the body.

I came up with an idea of how a steel cable or rod could be fitted (and removed if wanted) while the belt was locked on. It would pass up the butt crack and add security but also allow a butt plug etc. to be locked in place, and he marked out how and where it would fit.

I even came up with the new name for the belt: we are aiming to call it “Behind Bars”, with a slogan like all slaves need to be behind bars. The Behind Bars sign will be laser etched on that panel at the rear of the waistband, with a couple of steel bars like a cell door by its side. The section has also been extended down slightly to incorporate the cable pivot and lock for the crotch.

I suggested we could describe the various stages of attachments as they can be worn complete or in different levels: cock ring only, or cock cage, or outer cage only, or the whole lot—all being different prisons such as Wormwood Scrubs through to Alcatraz… Anyway, I digress lol. The whole thing is scarily coming to fruition and we are hoping that they could soon make up the finished item fully polished and gleaming, get me to post some pictures, and see how many we can sell… maybe early Christmas presents… Do you need your man “Behind Bars”?